HYPOID BEVEL GEAR TESTER

• Make : GLEASON
• Model : 17A
• Max gear diameter : 508 mm
• angle range : 0 – 90° degrees
• max. Spindle speed : 1200 rpm
• Machine weight : 2900 Kg

MACHINE IS IN EXCELLENT CONDITIONS

HYPOID BEVEL GEAR TESTER

• Make : GLEASON
• Model : 13A
• Max gear diameter : 338 mm
• angle range : 0 – 180° degrees
• Center distance : 203 mm
• Spindle speed : 400 – 1500 rpm
• Machine weight : 2500 Kg

MACHINE IS IN EXCELLENT CONDITIONS

HYPOID LAPPER

• Make: Gleason
• Model: 503
• Max gear diameter : 266 mm
• Max pinion diameter : 152 mm
• Pinion spindle – diameter of taper hole : 100 mm
• Pinion spindle – Taper per foot : 15 mm
• Pinion spindle – depth of taper : 76 mm
• Gear spindle – diameter of taper hole : 58 mm
• Gear spindle – taper per foot : 13 mm
• Gear spindle – depth of taper : 76 mm
• Machine weight : 4200 Kg

The machine is in excellent condition and is complete in all its parts and accessories.

HYPOID BEVEL GEAR TESTER

• Make : GLEASON
• Model : 502
• Max. gear diameter : 266 mm
• Max. Pinion diameter : 152 mm
• Depth of taper – pinion spindle : 3″
• Depth of taper – gear spindle : 3″
• Machine weight : 3200 Kg

MACHINE IS IN EXCELLENT CONDITIONS

5 axis CNC HYPOID BEVEL GEAR TESTER – FLANK TO FLANK

• Make : GLEASON PHOENIX
• Model : 500 HCT
• YEAR OF MANUFACTURING : 10/1998
• CNC : FANUC
• Capacity – Bevel/Hypoid Gears
• Gear OD (max.) 508 mm
• Pinion OD (max.) 300 mm
• Pinion offset @ 500mm

gear OD

• above center 127 mm
• below center 51 mm
• Pinion offset @ 250mrn

gear OD

• above center 124 mm
• below center 127 mm
• Shaft angle (w/o reverse mounting of gear) 85° to 180°
  (with reverse mounting of gear) 0° to 180°
• Gear spindle nose to pinion ax.is (min.) 51 mm – (max.) 305 mm
• Pinion spindle nose to gear ax.is (min.) 394 mm – (max) 394 mm
  Capacity – Cylindrical Gears
• Center distance (min.) 25 mm – (max) 305 mm
• Distance between spindle faces @ b = 0° – (min) 165 mm – (max) 419 mmMACHINE AXES TRAVELS
• Maximum haft angle travel (B-Axis) 85° to 180°
• Maximum vertical travel (Y-Axis) -127 mm to 127 mm
• Maximum horizontal travel (X-Axis) 140 mm to 394 mm
• Sliding base travel (Z-Axis) 51 mm to 305 mm
• Machine center to work spindle face (fixed) 114 mmPINION SPINDLE
• Diameter of tapered hole at large end 3 29/64″ (#39 taper)
  Taper per foot
• Depth of taper 3″
• Chucking force 4500 to 6000 psi
• Spindle speed range – single flank testing (SFT) 15 to 2500 RPM
• Spindle speed range – roll testing & SBN 15 to 3000 RPMSPECIFICATIONS (Cont’d)
  GEAR SPINDLE
• Diameter of tapered bole at large end 3 29/64″ (#39 taper)
• Taper per foot 39/64″
• Depth of taper 3″
• Chucking force 4500 to 6000 psi
• Spindle speed range – roll testing & SBN 15 to 1500 RPM
• Spindle speed range – single flank testing (SFI) 15 to 1250 RPM
• Brake Load – conventional testing 69 Nm
• high torque testing 100 Nm
• Machine Weight (approx.) 8200 kg
• Electrical Load 16,7 KW (Peak value)
• Compressed Air 17m3/hr. (est), 4.9 Bars

THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS and ACCESSORIES

5 axis CNC HYPOID BEVEL GEAR GRINDER

• Make : GLEASON PHOENIX
• Model : 400 HG
• YEAR OF MANUFACTURING : 2004 – Installed in 2005
• CNC : FANUC 160i-MB
• Max working diameter : 400 mm

THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS and ACCESSORIES

HYPOID GEAR GENERATOR

Make: GLEASON

Model: 102 / 2A

THE MACHINE IS IN EXCELLENT WORKING CONDITIONS AND
COMPLETE IN ALL ITS PARTS

3 AXIS CNC SPIRAL BEVEL GEAR GENERATOR

• Brand: Gleason
• Model: 106 CNC
• Number Of Teeth: 5 to 150
• Max cone distance: 228 m
• Max And Min module: 10 to 1
• Maxgearpitch diameter: 30 degree
• Spiral angle: ratio 10 to 1 457 mm, ratio 2 to 1 406 mm, ratio 1 to 1 323 mm
• Diametral Pitch 12,7 mod
• Max Full Depth 25,4 mm
• Max face width 69,9 mm

3 AXIS CNC SPIRAL BEVEL GEAR GENERATOR

• Brand: Gleason
• Model: 116 CNC
• Number Of Teeth: 5 to 150
• Max cone distance: 228 m
• Max And Min module: 10 to 1
• Maxgearpitch diameter: 30 degree
• Spiral angle: ratio 10 to 1 457 mm, ratio 2 to 1 406 mm, ratio 1 to 1 323 mm
• Diametral Pitch 12,7 mod
• Max Full Depth 25,4 mm
• Max face width 69,9 mm

HYPOID LAPPER

• Make: Gleason
• Model: 516
• Maximum gear diameter: 610 mm
• Maximum pinion diameter: 305 mm
• Max offset of gear spindle above and below center of pinion spindle: 152 mm
• Pinion spindle hole diameter: 95 mm
• Gear spindle hole diameter: 55 mm

Other info:
The machine is in excellent condition and is complete in all its parts and accessories.