HYPOID BEVEL GEAR TESTER

• Make : GLEASON
• Model : 17A
• Max gear diameter : 508 mm
• angle range : 0 – 90° degrees
• max. Spindle speed : 1200 rpm
• Machine weight : 2900 Kg

MACHINE IS IN EXCELLENT CONDITIONS

HYPOID BEVEL GEAR TESTER

• Make : GLEASON
• Model : 13A
• Max gear diameter : 338 mm
• angle range : 0 – 180° degrees
• Center distance : 203 mm
• Spindle speed : 400 – 1500 rpm
• Machine weight : 2500 Kg

MACHINE IS IN EXCELLENT CONDITIONS

CNC GEAR TESTER

• Make: CARL MAHR
• Model: PRIMAR MX4
• Year of manufacturing : 2001
• Max gear diameter: 600 mm
• Max workpiece length: 1200 mm
• Module range: 1 – 30
• FULL SOFTWARE UPDATES AND CALIBRATION DONE IN 2018 

Other info:
With the Primar, you handle a wide range of measuring tasks more economically than ever before.It is the first unit capable of checking eccentric parts with Formtester accuracy. With easy-to-use family programs for gears, geared tools, bevel gears, camshafts, pistons and connecting rods or customized measuring programs developed specifically for your parts.
Mechanical engineering and electrical engineering: gears,
rotors, spindles, ball bearing cages, spur gear shafts, involute
toothing, hollow shafts with internal toothing, pinion shafts,
planetary gears, hollow gears, control valves, tappets, camshafts
and conrods
Vehicle manufacturing: supplemented by pistons, steering
components, axle and shaft studs, cardan shafts, bevel gears etc.

HYPOID BEVEL GEAR TESTER

• Make : GLEASON
• Model : 502
• Max. gear diameter : 266 mm
• Max. Pinion diameter : 152 mm
• Depth of taper – pinion spindle : 3″
• Depth of taper – gear spindle : 3″
• Machine weight : 3200 Kg

MACHINE IS IN EXCELLENT CONDITIONS

5 axis CNC HYPOID BEVEL GEAR TESTER – FLANK TO FLANK

• Make : GLEASON PHOENIX
• Model : 500 HCT
• YEAR OF MANUFACTURING : 10/1998
• CNC : FANUC
• Capacity – Bevel/Hypoid Gears
• Gear OD (max.) 508 mm
• Pinion OD (max.) 300 mm
• Pinion offset @ 500mm

gear OD

• above center 127 mm
• below center 51 mm
• Pinion offset @ 250mrn

gear OD

• above center 124 mm
• below center 127 mm
• Shaft angle (w/o reverse mounting of gear) 85° to 180°
  (with reverse mounting of gear) 0° to 180°
• Gear spindle nose to pinion ax.is (min.) 51 mm – (max.) 305 mm
• Pinion spindle nose to gear ax.is (min.) 394 mm – (max) 394 mm
  Capacity – Cylindrical Gears
• Center distance (min.) 25 mm – (max) 305 mm
• Distance between spindle faces @ b = 0° – (min) 165 mm – (max) 419 mmMACHINE AXES TRAVELS
• Maximum haft angle travel (B-Axis) 85° to 180°
• Maximum vertical travel (Y-Axis) -127 mm to 127 mm
• Maximum horizontal travel (X-Axis) 140 mm to 394 mm
• Sliding base travel (Z-Axis) 51 mm to 305 mm
• Machine center to work spindle face (fixed) 114 mmPINION SPINDLE
• Diameter of tapered hole at large end 3 29/64″ (#39 taper)
  Taper per foot
• Depth of taper 3″
• Chucking force 4500 to 6000 psi
• Spindle speed range – single flank testing (SFT) 15 to 2500 RPM
• Spindle speed range – roll testing & SBN 15 to 3000 RPMSPECIFICATIONS (Cont’d)
  GEAR SPINDLE
• Diameter of tapered bole at large end 3 29/64″ (#39 taper)
• Taper per foot 39/64″
• Depth of taper 3″
• Chucking force 4500 to 6000 psi
• Spindle speed range – roll testing & SBN 15 to 1500 RPM
• Spindle speed range – single flank testing (SFI) 15 to 1250 RPM
• Brake Load – conventional testing 69 Nm
• high torque testing 100 Nm
• Machine Weight (approx.) 8200 kg
• Electrical Load 16,7 KW (Peak value)
• Compressed Air 17m3/hr. (est), 4.9 Bars

THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS and ACCESSORIES

CNC GEAR TESTER

• Make: CARL MAHR
• Model: PRIMAR MX4
• Year of manufacturing : 2011
• Max gear diameter: 600 mm
• Max workpiece length: 1200 mm
• Module range: 1 – 30

Other info:
With the Primar, you handle a wide range of measuring tasks more economically than ever before.It is the first unit capable of checking eccentric parts with Formtester accuracy. With easy-to-use family programs for gears, geared tools, bevel gears, camshafts, pistons and connecting rods or customized measuring programs developed specifically for your parts.
Mechanical engineering and electrical engineering: gears,
rotors, spindles, ball bearing cages, spur gear shafts, involute
toothing, hollow shafts with internal toothing, pinion shafts,
planetary gears, hollow gears, control valves, tappets, camshafts
and conrods
Vehicle manufacturing: supplemented by pistons, steering
components, axle and shaft studs, cardan shafts, bevel gears etc.

STRAIGHT BEVEL GEAR TESTER

• Make: Klingelnberg

Other info:
The machine is in excellent condition and is complete in all its parts and accessories

GEAR TESTER

• Make: Maag
• Model: PH 60
• Max gear diameter: 600 mm (without tailstock)
• Max gear diameter: 300 mm (with tailstock)
• Max pinion length: 750 mm
• Module range: 1 – 15
• Max gear width: 150 mm
• Max workpiece weight: 150 kg

Other info:
The machine is in excellent condition and is complete in all its parts and accessories

GEAR TESTER

• Make: Klingelnberg
• Model: PFSU 600
• Gear diameter: 15 – 600 mm
• Module range: 0.5 – 15
• Distance between centers: 50 – 650 mm
• Gear width: 150 mm
• Max helix angle: 60°
• Max work load: 200 kg

Other info:
The machine is in excellent condition and is complete in all its parts and accessories

CNC GEAR TESTER

• Make: Klingelnberg
• Model: PNC 33
• Y.O.M.: 1996
• Max. gear diameter: 330 mm
• Module range: 0.5 – 15
• Z-axis travel: 400 mm

Other info: 
The machine is in excellent condition and is complete in all its parts and accessories.